CORE OPTIONS

Please see specific pattern page for core options.

ACRYLIC

ACRYLIC
Please see specific pattern page for core options.
Recycling, Manufacturing, Furniture, LEED for Retail & Construction

ACRYLITE® GP

ACRYLITE® GP acrylic sheet is a cell-cast sheet made to exacting standards, offering excellent optical characteristics, light stability and low internal stress levels for consistent performance. ACRYLITE GP sheet is available in a wide range of standard sizes and thicknesses, in colors and colorless and low minimum order quantities.

No matter which of our core materials you specify, we are committed to minimizing our environmental impact.

Operating under the Guiding Principles of Responsible Care®, we strive to continuously improve our health, safety, and environmental performances. By becoming a national member of the U.S. Green Building Council (USGBC), we take environmental stewardship a step further. Our goal is to improve the environment by supplying sustainable and long-living acrylic products to the green building sector and to all other markets we serve.


Recycling
•Evonik Cyro acrylic products are one of the most readily recyclable plastics. Some grades can be re-extruded many times without losing their properties. Our acrylics can be “reverse-polymerized” to yield the original base chemical, MMA, which can then be used to make acrylic again or a number of other commercial products.
•Evonik Cyro uses an average of 20 percent and up to 75 percent pre-consumer reclaimed acrylic in its extruded acrylic products.


Health
•Evonik Cyro is one of the few manufacturers using only colorants that are free of heavy metals in its acrylic products and has done so since the 1980′s.
•Evonik Cyro acrylic products are free of Bisphenol A.
•Evonik Cyro does not add or use plasticizers in the production of our acrylic products.
•Evonik Cyro acrylic products do not contain components such as formaldehyde that can result in the release of harmful vapors or gases.
•Evonik Cyro acrylic products do not contain paints or adhesives.


Manufacturing
•Evonik Cyro produces its acrylic monomer, polymer, and sheet in integrated manufacturing facilities in several locations across North America, helping to reduce the energy and CO2 impact involved in the transportation of its raw materials and finished products.
•Evonik Cyro operates a “one-of-a-kind” biological pollution control system that uses bacteria to remove and eliminate solvent fumes from its process. This cutting edge technology minimizes the impact of our facility on the environment.
•Evonik Cyro product plants are ISO 14001 certified to meet strict standards of environmental responsibility.


Furniture
•As a component for furniture or a shelving display our products comply with the credit requirements to obtain 1 point.


LEED for Retail

Environmental Quality (EQ) Credit 4:
•Low-Emitting Materials Option E.


LEED for New Construction
•Materials and Resources (MR) Credit 5.1
•Regional Materials-10 percent extracted, processed & manufactured regionally.

CELTEC

CELTEC
Please see specific pattern page for core options.
Core Note: This core is provided as unfinished only. Specific finishing and bending information can be obtained by downloading the information from our specification document section.

Celtec® is a rigid expanded foam polyvinyl chloride (PVC) material whose extraordinary combination of features makes it ideal for carved and sculpted architectural wall panels requiring heat forming to specific radii. Sheets are tough, high strength and lightweight, and can be ordered in a wide range of sizes and thicknesses. Celtec® expanded PVC sheets are free of lead, cadmium, barium and zinc and have passed all three UL 1975 Fire Test requirements.

Advantages
•Lightweight
•Easily Fabricated (No special tools)
•Durable–Indoors or Out
•Will not Absorb Water
•Fire Retardant
•Corrosion Resistant
•High Strength
•Easily Painted or Silk-Screened
•Easily Cleaned
•Low Heat Conductivity
•Weather Resistant
•High Impact Resistance
•High Insulation Characteristics
•Reduces Noise

Professional Theatre, Motion Picture and Stage Set Designers use Celtec® with confidence. It’s the perfect choice since Celtec® meets all three tough U.L. 1975 Fire Test requirements.

ForesColor

ForesCOLOR
Please see specific pattern page for core options.
Engineered Colored Wood

ForesCOLOR® is an innovative product that combines the natural features of wood with the brightness of colors and, because of its unique flexibility, allows exploring the third dimension, the beauty of textures and the best of engineering.


ForesCOLOR® is not MDF, it is an evolution of MDF.

The added value of ForesCOLOR® comes not only from color but also from its distinctive composition and manufacturing process. It is a wood fibre panel colored throughout, where fibres are colored individually, impregnated with organic dyes and chemically bonded together by a special resin which gives ForesCOLOR® unique physical and mechanical features such as:
•moisture resistance
•greater internal cohesion and, therefore, higher mechanical strength
•greater resistance to bending
•requires less effort to finish
•ensures a lower abrasion of tools
•FSC mixed credit certified.

CLICK HERE FOR MORE INFORMATION

HDF

HDF
Please see specific pattern page for core options.
HDF is ideal for use in furniture applications, marquing and embossing.

HDF 

IDF: Interlam Designed Fiberboard

IDF: INTERLAM DESIGNED FIBERBOARD
Please see specific pattern page for core options.
For outstanding performance, durability and consistency in our carved Architectural Wall Panels this proprietary formulation of a specific IDF board provides a more consistent density profile throughout the thickness of the board. Our advanced refining processes and high quality wood fibers offer excellent surface qualities for deep, detailed profiling of carved wall panels and furniture components. An increased internal bond makes this grade ideal for intricate machining and is a popular choice for retail and commercial displays. The consistent density ensures even finishing and uniform carving profiles. Interlam is proud to be the only manufacturer providing this core to the carved  wall panel market.

NAF: No Added Formaldehyde

NAF: No Added Formaldehyde
Please see specific pattern page for core options.
NAF is not available in patterns that start as 1.5 inches thick.
Specific Core Notes:
All NAUF cores will accept finish differently than standard IDF Cores. Finish samples must be requested in the specified core to verify final design intent. If you are uncertain of the core of the sample used to specify the product, request an additional sample prior to specifying the core and finish. Most samples in the current market are manufactured using the IDF core. The IDF core produces a more refined finish than any of the cores below.

The cores below represent a specialty core offering and may add to standard lead times due to the market availability. It is recommended that the specifying body contact Interlam to discuss the specific job and application to determine the best core in this category based on thickness, size, quantity and availability prior to specifying.


Medite® II (.pdf)

A Sustainable Design Fiberboard (SDF). Rigorously tested through a long resume of applications around the world, Medite® II is proven to deliver superior design capabilities coupled with environmental stewardship. Medite® II represents the global environmental standard, matching aggressive MDF design capabilities with a formaldehyde free adhesive system.
•Formaldehyde-free adhesive system.
•Superior physical properties to standard MDF. Truly high performance screw holding and MOR capabilities, among others.
•Pre-consumer recycled wood fiber
•FSC® Certified – available option
•Potential LEED® 2009 credit support: MRc4, 5, 7 & IEQc4.4
•Meets CARB ATCM Phase 2 emission limits – CARB NAF Exempt
•Third party certification – SCS, EPP
•CHPS Compliant – California section 01350 approved

NAF Fire Rated

NAF FIRE RATED
Please see specific pattern page for core options.
NAF is not available in patterns that start as 1.5 inches thick.
Medite® FR

Made with a formaldehyde free adhesive system and is designed for critical applications where Class 1 flame retardant material is required. Medite FR has a low flame spread and smoke development as well as extremely low VOC emissions. During the manufacturing process, the flame retardant additive is blended with the fiber throughout the panel. This process delivers superior performance versus topical flame retardant applications. In addition, Medite FR can be machined, cut, sanded, and grooved without compromising the flame retardance.

Medite® delivers:
•Guardian Certified to U.S. & Canadian Class 1 standards:
•Flame Spread – 25
•Smoke Developed – 50
•Pre-consumer recycled wood fiber
•FSC® Certified – available option
•Potential LEED® 2009 credit support: MRc4, 5, 7 and IEQc4.4
•Meets CARB ATCM 93120 Phase 2 emission limits – CARB NAF Exempt
•Third party certification – SCS, EPP, Guardian
•CHPS compliant – California section 01350 approved


Moisture Resistant

MOISTURE RESISTANT
Please see specific pattern page for core options.
EXTIRA
•Revolutionary Performance in Exterior Environments
•Moisture, rot and termite resistant.
•No added urea formaldehyde: made from sustainable materials.
•One piece solid substrate – not laminated.
•Moisture resistant: As measured by AWPA E-16 Field Test for Evaluation of Wood Preservatives To Be Used Out of Ground Contact: Horizontal Lap-Joint Method.
•Termite resistant: As measured by AWPA E-7 Standard Method of Evaluation Wood Preservatives by Field Tests with Stakes
•5-year limited warranty
•User Friendly
•Can be used for virtually any nonstructural paint grade application, including exterior carved MDF wall panels, door and window parts, signage, garage doors and other architectural components. Works with standard tools and practices: easy to handle, cut, machine and nail. Can be sandblasted, routed and carved.

Extira Specs (Offsite)


Premier® MR

A premium medium density fiberboard that offers excellent surface properties for deep detailed profiling of carved MDF wall panels, fixtures and furniture components.

When looking for some of the best performing, moisture-resistant industrial panels for your end use applications Premier MR is an option that’s right for you. This product delivers the flexibility, stability, durability and performance customers have come to expect from our panels. If you are sourcing a moisture resistant substrate, we have a selection that addresses your kitchen, bath, laboratory cabinet and/or other high humidity environment needs.



Medex®

Represents the highly versatile ideal of Sustainable Design Fiberboard (SDF). Medex® is a powerful combination of moisture resistance, superior MDF board properties, and a formaldehyde free adhesive system. Medex® has a rock solid track record of superior design capabilities and environmental stewardship around the world.
•Formaldehyde-free adhesive system
•Especially suitable in interior applications where moisture is a concern, Medex does succeed in the 6 cycle accelerated aging test
•Superior physical properties to standard MDF. Truly high performance screwholding and MOR capabilities, among others
•Pre-consumer recycled wood fiber
•FSC® Certified – available option
•Potential LEED® 2009 credit support: MRc4, 5, 7 & IEQc4.4
•Meets CARB ATCM 93120 Phase 2 emission limits – CARB NAF Exempt
•Third party certification – SCS, EPP
•CHPS Compliant – California section 01350 approved
•Limitations: Medex is not suitable for structural applications, exterior siding or exterior trim



Class A Fire Rated

CLASS A FIRE RATED
Please see specific pattern page for core options.
When you need a flame-retardant MDF solution for your carved MDF wall panels and furniture component needs, Flakeboard Premier® FR MDF is best in class. Our Class A/Class 1 rated fire-retardant MDF panels are ideal for interior, non-structural use in public areas such as schools, hotels, hospitals and restaurants. Premier® FR MDF’s design flexibility and workability make it an ideal choice for a variety of applications.

Flakeboard Premier® FR MDF delivers:
•Smooth surface properties for painting or laminating
•Dense, flat surfaces for easy machining
•Uniform fibre distribution and texture
•Sharp edges and strong internal bond
•Good acoustical dampening properties
•The right thickness for thick board application