ForesCOLOR is a through-color wood fiber panel. Individual fibers are impregnated with organic dye and chemically bonded by resin specially developed to give the panel its special properties. ForesCOLOR is an evolution of MDF and fits somewhere between a wood fiber board and a solid surface, because of the specially formulated resin within the board.



Raw Materials

From the very beginning a rigorous selection of raw material is carried out. Wood, pigments and glues are carefully selected. ForesCOLOR is made exclusively of pine wood. The glue is exclusively developed in association with a resin manufacturer. It is mainly made of a synthetic resin formed by melamine urea-formaldehyde. ForesCOLOR is certified E0 (Low on formaldehyde). Exhaustive research was carried out in order to obtain color stability, minimum toxicity whilst keeping in mind ecological factors.


Advantages for Architects and Designers

ForesCOLOR® is a “one of a kind” product. It is not only unique for its look and color, but for its diverse extensive application possibilities.

Natural Look
Although it is essentially a manufactured product, ForesCOLOR® has a textured surface that gives it a very special look and feeling unlike artificially painted surfaces.

Wear and Tear
Due to ForesCOLOR® being colored consistently all the way through, the panels can be scratched a number of times, but they are easy to repair. All that is required is sanding and re-lacquering and they are back to brand new.

Different Finishing Possibilities
ForesCOLOR® accepts any kind of finishing. By applying a glossy lacquer one can have a modern trendy look, and by applying oil one can create a slightly more conventional look. A mat or waxed look, and fire retardant and textured finishes are all achievable using ForesCOLOR®.

Easy to Assemble
During the planning stage of a project, architects and designers won’t have to worry about hiding the edges.
 ForesCOLOR® can be fitted without further finishing.

Sustainability/USGBC – LEED
ForesCOLOR® is manufactured from 50-60% recycled raw materials purchased from pallet and furniture manufacturers.  ForesCOLOR is FSC certified.

As stated previously, the formaldehyde emissions of ForesCOLOR® are very low and it is considered non toxic according to US requirements since the emissions are below 0.1ppm. Also, ForesCOLOR® avoids the use of paints that often contain formaldehyde as a preservative.
Advantages for Manufacturers

High Density Profile
This characteristic is very important since it means that after machining, there is little or no sanding required, thus drastically reducing the cost of labor. This also allows an easier finishing, as fewer coats are required. It is enough to apply one coat of sealer followed by one or two coats of lacquer (although a little extra should be applied to the edges).

Moisture and UV Resistance
The panels have to be lacquered on all edges but ForesCOLOR® may be used for kitchens, bathrooms and flooring. We have some customers using it externally, but it is best suited for interior applications.

ForesCOLOR is at least 30% stronger than standard MDF making it a lot more stable.

Colored Throughout
No need for expensive and toxic colored lacquering. However we do have customers using paint with ForesCOLOR® because it is much easier and more cost effective. It is easy to assemble as it does not require edging.

Easy to Machine
Besides the fact that ForesCOLOR® does not require sanding, it should also be noted that ForesCOLOR® has a much lower percentage of sand and metal. It also has a high melamine content that acts as a lubricant for the cutting tools, enabling them to last a lot longer. The use of sub products such as branches, bark and residue from timber mills contributes to the sustained management of the planets forests.

Important Notes
- Small light brown pine chips are visible at random throughout a sheet of ForesCOLOR® board, adding to its unique natural look!
- While variances in color remain within acceptable parameters, according to CIE lab norms allied to data colors software, it is important to note that slight variations may occur. This is due to the natural pine fibers and eco friendly organic dyes that make ForesCOLOR® the innovative product it is!
Available Colors